MERRY CHRISTMAS 2018

UPDATE 1 DEC 2018

------------------------------------------------------------------------
#  Application example
------------------------------------------------------------------------ 

5. Time-controlled lighting with LOGO! 8 and LOGO! CMR (Set 1)
 (11/7/2018) [109063024]

   The lighting is controlled by LOGO! 8. This is connected to a LOGO!
   CMR. By selecting different operating modes, you decide whether the
   lighting is switched on or off at sunset or sunrise. In addition,
   it is possible to manually enter a switch-on or switch-off time for
   the lighting via SMS or locally onsite.
For
   products:6ED1055-4MH00-0BA1, 6ED1052-2FB00-0BA8,...

   more
   => https://support.industry.siemens.com/cs/ww/en/view/109063024/news
------------------------------------------------------------------------  

7. SIMATIC PN/CAN LINK – Configuring 'CAN transparent' operating mode
 (11/19/2018) [109760971]

   This application example shows the operation of an S7-1200
   controller and two PN/CAN LINK network transitions, which are
   connected to each other via PROFINET. The following is explained:
   • How to configure messages and to assign parameters to tags
   • How to insert blocks and go online
 
For products:6BK1620-0AA00-0AA0, 6ES7822-0A.05-..,...

   more
   => https://support.industry.siemens.com/cs/ww/en/view/109760971/news
------------------------------------------------------------------------  

4. SIMATIC HMI Control Panels - Innovative Design and Operation
 (11/23/2018) [91174767]

   Give your machine an unmistakable face and turn the interface
   between machine and human into the trademark of your automation
   solution.
For products:6AV2124-1MC01-0AX0,
   6AV2181-8XP00-0AX0,...

   more
   => https://support.industry.siemens.com/cs/ww/en/view/91174767/news
------------------------------------------------------------------------  

1. Network and Communication diagnostics
 (11/5/2018) [21566216]

   To make diagnostic in automation technology, there are numerous
   different procedures. This document gives you an overview of the
   options available for diagnosing a SIMATIC controller or a SCALANCE
   network device, networks and communication.
For
   products:6GK5302-7GD00-4GA3, 6GK5213-3BF00-2AB2,...

   more
   => https://support.industry.siemens.com/cs/ww/en/view/21566216/news
------------------------------------------------------------------------  

6. Library of general functions (LGF) for STEP 7 (TIA Portal) and
   S7-1200 / S7-1500
 (11/6/2018) [109479728]

   The library "LGF (Library of general functions)" contains
   additional functions for STEP 7 (TIA Portal).
For
   products:6ES7822-1..05-..

   more
   => https://support.industry.siemens.com/cs/ww/en/view/109479728/news
------------------------------------------------------------------------ 

7. Traffic Shaper
 (11/7/2018) [109750661]

   To prevent peak loads and data loss, the Traffic Shaper is a
   helpful tool. Through the Traffic Shaper, data packets originating
   from a network card can be limited according to predetermined
   maximum values
For products:6AG4112-2....-....,
   6AG4104-2DP32-2FX0,...

   more
   => https://support.industry.siemens.com/cs/ww/en/view/109750661/news
------------------------------------------------------------------------  

------------------------------------------------------------------------

#  FAQ
------------------------------------------------------------------------

10. How do you request a new temporary password if the password from 
   the ready-to-download e-mail from OSD has expired? 
 (11/28/2018) [101095472]

   You can request a new temporary password via the Online Software
   Delivery web page.
For products:3ZS1322-5CC10-0YL5,
   3ZS1314-5CC10-4YA5,...

   more
   => https://support.industry.siemens.com/cs/ww/en/view/101095472/news
------------------------------------------------------------------------
11. How do you log in to download products after receiving an e-mail 
   from OSD indicating that a download is ready? 
 (11/28/2018) [109476151]

   After receiving an e-mail indicating that a download is ready you
   log in to Online Software Delivery (OSD) with or without Industry
   Mall Account to download your prepared products.
For
   products:3ZS1322-5CC10-0YL5, 3ZS1314-5CC10-4YA5,...

   more
   => https://support.industry.siemens.com/cs/ww/en/view/109476151/news
------------------------------------------------------------------------  

14. How do you diagnose a rolling bearing with the SM 1281 taking into 
   account the bearing data and fault frequencies? 
 (11/21/2018) [109761652]

   The SM 1281 can analyze the bearing components of a rolling bearing
   in such a way that you can obtain information about how urgent it
   might be to make replacements. For this the SM 1281 needs
   bearing-related data as described in this entry.
For
   products:6AT8007-1AA10-0AA0

   more
   => https://support.industry.siemens.com/cs/ww/en/view/109761652/news
------------------------------------------------------------------------  

63. Where do you procure the current trial software for the TIA Portal
   STEP 7 V15, WinCC V15 and Startdrive V15 and V15.1?
 (11/12/2018) [109753089]

   Free trial versions of TIA Portal components V15 and V15.1 are
   available from this web page.
For products:6AV2100-0AA05-0AA7,
   6AV2102-0AA05-0AA7,...

   more
   => https://support.industry.siemens.com/cs/ww/en/view/109753089/news
------------------------------------------------------------------------ 

 

------------------------------------------------------------------------
#  Manual
------------------------------------------------------------------------ 

61. SIMATIC S7-1200/S7-1500 F-CPUs
 (11/26/2018) [109478599]

   11/2018, Product Information, A5E35635424-AG
For
   products:6ES7513-1AL00-0AB0, 6ES7511-1AK00-0AB0,...

   more
   => https://support.industry.siemens.com/cs/ww/en/view/109478599/news
------------------------------------------------------------------------  

27. SIWAREX WP251
 (11/27/2018) [109762579]

   11/2018, Operating Instructions, A5E37203357-AD,
   A5E37203357
For products:7MH4960-6AA01

   more
   => https://support.industry.siemens.com/cs/ww/en/view/109762579/news
------------------------------------------------------------------------  

27. SIMATIC Ident Configuration Guide
 (11/22/2018) [67384964]

   10/2018, Operating Instructions
For products:6GT2821-6AC40,
   6GT2091-4LH20,...

   more
   => https://support.industry.siemens.com/cs/ww/en/view/67384964/news
------------------------------------------------------------------------  

67. SIMATIC HMI Quick Install Guide Comfort Panels V2
 (11/5/2018) [109750954]

   09/2018, Getting Started, A5E41474422-AB
For
   products:6AV2124-0QC02-0AX1, 6AV2124-0UC02-0AX1,...

   more
   => https://support.industry.siemens.com/cs/ww/en/view/109750954/news
------------------------------------------------------------------------
68. SIMATIC S7-1500/S7-1200/S7-400/S7-300 Parameters of technology
   objects in TIA Portal Openness
 (10/22/2018) [109744932]

   10/2018, Product Information, A5E40958798-AB
For
   products:6ES7822-1..03-..

   more
   => https://support.industry.siemens.com/cs/ww/en/view/109744932/news
------------------------------------------------------------------------ 

------------------------------------------------------------------------
#  Product note
------------------------------------------------------------------------  

 

67. Online Software Delivery - What’s new?
 (11/29/2018) [109748903]

   You are provided a summary of the new features and functions for
   the Online Software Delivery platform. We are also including a more
   detailed description for select OSD features.

   more
   => https://support.industry.siemens.com/cs/ww/en/view/109748903/news
------------------------------------------------------------------------ 

HAPPY DIWALI 2018

UPDATE 1 NOV 2018

------------------------------------------------------------------------
#  Application example
------------------------------------------------------------------------ 

2. Building Automation: House Control with LOGO! 8 and Touch Panel
   KTP700 Basic (LOGO! Set 10)
 (10/26/2018) [68585344]

   The house control application example (set 9) is expanded by a
   SIMATIC HMI Touch Panel KTP700 Basic. House functions can easily be
   controlled and monitored with the central Touch Panel. The color
   display of the touch panel can be modified individually.
For
   products:6GK7177-1MA10-0AA0, 6AV2100-0AA01-0AA0,...

   more
   => https://support.industry.siemens.com/cs/ww/en/view/68585344/news
------------------------------------------------------------------------

3. Building Automation: House Control with LOGO! 8 and Master-Slave
   Communication (LOGO! Set 9)
 (10/26/2018) [64143308]

   The LOGO! 8 controller together with further LOGO! 8 controllers is
   used to control and monitor various functions in houses or other
   buildings. A smartphone can be used to monitor and control the
   house functions via WLAN.
For products:6GK7177-1MA10-0AA0,
   6ED1055-1NB10-0BA2,...

   more
   => https://support.industry.siemens.com/cs/ww/en/view/64143308/news
------------------------------------------------------------------------

4. Building Automation: House Control with LOGO! 8 and Weather Sensors
   (LOGO! Set 11)
 (10/26/2018) [68585346]

   With LOGO! 8, data can be exchanged between several LOGO! modules
   via network communicaiton. In the application, a weather station is
   connected to an existing house automation with a LOGO! 8 and a
   Touch Panel. Depending in the weather data, various house functions
   are controlled automatically and weather warnings are
   generated.
For products:6GK7177-1MA10-0AA0,
   6AV2100-0AA01-0AA0,...

   more
   => https://support.industry.siemens.com/cs/ww/en/view/68585346/news
------------------------------------------------------------------------ 

6. S7 Energy Efficiency-Monitor for machines
 (10/26/2018) [109753230]

   Standardized efficiency evaluation of machines, including
   efficiency log. The S7 energy efficiency monitor for machines
   allows you to easily evaluate the energy efficiency of your machine
   according to the measuring instruction VDMA 34179. Use the
   ready-made HMI visualization to efficiently show the energy data of
   your machine.
For products:6ES7211-1HD30-0XB0,
   6ES7217-1AG40-0XB0,...

   more
   => https://support.industry.siemens.com/cs/ww/en/view/109753230/news
------------------------------------------------------------------------  

5. Library for PROFINET data records
 (10/19/2018) [109753067]

   The "LPNDR" block library includes several function blocks. With
   these you can read various device and status information from a
   PROFINET device and describe parameters.
For
   products:6GK5302-7GD00-4GA3, 6ES7134-6GD00-0BA1,...

   more
   => https://support.industry.siemens.com/cs/ww/en/view/109753067/news
------------------------------------------------------------------------  

7. SIMATIC Machine Simulator Virtual commissioning of machines Getting
   Started
 (10/19/2018) [109758943]

   This Getting Started helps you to become familiar with essential
   steps for performing virtual commissioning with the SIMATIC Machine
   Simulator based on a specific application example.
For
   products:6ES7822-1AA05-0XC2, 6ES7822-1AA05-0XC5,...

   more
   => https://support.industry.siemens.com/cs/ww/en/view/109758943/news
------------------------------------------------------------------------  

------------------------------------------------------------------------
#  DOWNLOAD
------------------------------------------------------------------------ 

16. TRIAL Download SIMATIC S7-PLCSIM Advanced V2.0 SP1
 (10/26/2018) [109758848]

   The Trial download of the V2.0 SP1 of SIMATIC S7-PLCSIM Advanced is
   available effective immediately (October 26, 2018).
For
   products:6ES7823-1FA00-0YL5, 6ES7823-1FE00-0YL5,...

   more
   => https://support.industry.siemens.com/cs/ww/en/view/109758848/news
------------------------------------------------------------------------
17. SIMATIC STEP 7 Safety Advanced V15.1 – TRIAL
 (10/26/2018) [109759618]

   SIMATIC STEP 7 Safety / Advanced V15.1, the high-performance add-on
   package for programming the fail-safe S7 controllers for the
   Totally Integrated Automation Portal V15.1.
For
   products:6ES7833-1FC00-0YX2, 6ES7833-1FC00-0YM2,...

   more
   => https://support.industry.siemens.com/cs/ww/en/view/109759618/news
------------------------------------------------------------------------
18. SIMATIC STEP 7 and WinCC V15.1 TRIAL Download
 (10/26/2018) [109761045]

   SIMATIC STEP 7 and WinCC V15.1 TRIAL Download
For
   products:6ES7822-0A.05-.., 6ES7822-1..05-..,...

   more
   => https://support.industry.siemens.com/cs/ww/en/view/109761045/news
------------------------------------------------------------------------
19. STEP 7 V5.6 SP1 / STEP 7 Professional 2017 SR1 Trial Download
 (10/26/2018) [109761679]

   Free trial versions of STEP 7 V5.6 SP1 / STEP 7 Professional 2017
   SR1 are available from this web page.
For products:6ES7810-4C,
   6ES7810-4CC11-0JA5,...

   more
   => https://support.industry.siemens.com/cs/ww/en/view/109761679/news
------------------------------------------------------------------------  

11. Firmware update for CPU 1214C, DC/DC/RELAIS, 14DI/10DO/2AI
 (10/4/2018) [107539979]

   Firmware update for CPU 1214C, DC/DC/RELAIS, 14DI/10DO/2AI
   6ES7214-1HG40-0XB0
For products:6AG1214-1HG40-4XB0,
   6ES7214-1HG40-0XB0,...

   more
   => https://support.industry.siemens.com/cs/ww/en/view/107539979/news
------------------------------------------------------------------------
12. Firmware update for SM 1238 Energy Meter 480 VAC
 (9/18/2018) [109760770]

   This entry contains all firmware versions for the SM 1238 Energy
   Meter 480 VAC.
 
For products:6ES7238-5XA32-0XB0

   more
   => https://support.industry.siemens.com/cs/ww/en/view/109760770/news
------------------------------------------------------------------------ 

------------------------------------------------------------------------

#  FAQ
------------------------------------------------------------------------

30. When changes are made in the standard user program, why do you have 
   to load in the STOP mode with fail-safe S7-1200F/S7-1500F CPUs? 
 (10/24/2018) [109761403]

   The following three scenarios describe the cause and remedy for
   avoiding loading in the STOP mode.
For
   products:6ES7515-2FM00-0AB0, 6ES7516-3FN00-0AB0,...

   more
   => https://support.industry.siemens.com/cs/ww/en/view/109761403/news
------------------------------------------------------------------------  

21. How do you change the SUS contract data in OSD (Online Software
   Delivery)?
 (10/16/2018) [109760477]

   Taking an example we will show you how to change the SUS contract
   data in OSD.
For products:3ZS1322-5CC10-0YL5,
   3ZS1314-5CC10-4YA5,...

   more
   => https://support.industry.siemens.com/cs/ww/en/view/109760477/news
------------------------------------------------------------------------  

19. How do you evaluate the 'RUN / STOP' mode of the CPU via an HMI
   operator panel?
 (10/2/2018) [109481628]

   Evaluating the RUN / STOP mode of the CPU via the system function
   "GetPLCMode".
For products:6AV2124-1MC01-0AX0,
   6AV2124-0JC01-0AX0,...

   more
   => https://support.industry.siemens.com/cs/ww/en/view/109481628/news
------------------------------------------------------------------------  

------------------------------------------------------------------------
#  Manual
------------------------------------------------------------------------ 

42. Readme SIMATIC S7-PLCSIM Advanced V2.0 SP1
 (10/25/2018) [109739154]

   10/2018, Readme, A5E38332429-AE
For
   products:6ES7823-1FA01-0YA5, 6ES7823-1FA01-0YE5,...

   more
   => https://support.industry.siemens.com/cs/ww/en/view/109739154/news
------------------------------------------------------------------------
43. SIMATIC PROFINET PROFINET with STEP 7 V15
 (10/17/2018) [49948856]

   10/2018, Function Manual, A5E03444486-AJ
For
   products:6AV2124-1MC01-0AX0, 6GK5302-7GD00-4GA3,...

   more
   => https://support.industry.siemens.com/cs/ww/en/view/49948856/news
------------------------------------------------------------------------  

66. Operating Instructions (compact) LOGO! ICL230
 (10/11/2018) [109761345]

   09.2018, Compact Operating Instructions, P10070.0001
For
   products:LOGO! ICL230

   more
   => https://support.industry.siemens.com/cs/ww/en/view/109761345/news
------------------------------------------------------------------------  

------------------------------------------------------------------------
#  Product note
------------------------------------------------------------------------ 

72. Delivery release TIA Portal V15.1
 (10/26/2018) [109758794]

   Your gateway to automation in the Digital Enterprise
For
   products:6AV6362-2AB00-0AH0, 6AV6362-2AB00-0BB0,...

   more
   => https://support.industry.siemens.com/cs/ww/en/view/109758794/news
------------------------------------------------------------------------
73. Delivery Release SIMATIC STEP 7 Professional / Basic V15.1
 (10/26/2018) [109758795]

   Controller software of the new generation
For
   products:6ES7810-5CC04-0YY2, 6ES7822-0AA00-0YL0,...

   more
   => https://support.industry.siemens.com/cs/ww/en/view/109758795/news
------------------------------------------------------------------------
74. Delivery release STEP 7 Safety Basic / Advanced V15.1
 (10/26/2018) [109759617]

   Delivery release for SIMATIC STEP 7 Safety Basic / Advanced V15.1,
   the high-performance add-on package for programming of fail-safe S7
   controllers for the Totally Integrated Automation Portal V15.1.

 
For products:6ES7833-1FC00-0YX2, 6ES7833-1FC00-0YM2,...

   more
   => https://support.industry.siemens.com/cs/ww/en/view/109759617/news
------------------------------------------------------------------------  

79. Product information on LOGO! 6 spare parts availability
 (10/22/2018) [109761232]

   With immediate effect, LOGO! 6 basic devices and expansion modules
   are available as spare parts only.
For
   products:6ED1052-2CC01-0BA6, 6ED1052-2MD00-0BA6,...

   more
   => https://support.industry.siemens.com/cs/ww/en/view/109761232/news
------------------------------------------------------------------------  

58. SM1238 Energy Meter 480VAC - Enhanced use cases
 (10/9/2018) [109760717]

   The updated Energy Meter offers additional uses cases with the
   Hardware Change FS02. The article number is unchanged.
For
   products:6ES7238-5XA32-0XB0

   more
   => https://support.industry.siemens.com/cs/ww/en/view/109760717/news
------------------------------------------------------------------------  

UPDATE 1 OCT 2018

------------------------------------------------------------------------
#  Application example
------------------------------------------------------------------------ 

9. Greenhouse control with SIMATIC S7-1200
 (9/28/2018) [109757060]

   Manually watering plants can be very time-consuming. Especially in
   the hot and dry seasons, the well-being of plants should be ensured
   on a daily basis. This solution demonstrates how you can automate
   your irrigation with a SIMATIC S7-1200.
For
   products:6ES7211-1HD30-0XB0, 6ES7217-1AG40-0XB0,...

   more
   => https://support.industry.siemens.com/cs/ww/en/view/109757060/news
------------------------------------------------------------------------ 

 

1. Performance data overview
 (9/28/2018) [25209605]

   It is important to estimate the response times in a system made up
   of controllers, distributed IO, PCs or also components of the
   industrial identification already during the planning phase of a
   plant. With measured performance data on industrial communication
   with SIMATIC S 7 components, you receive secure statements
   here.
For products:6ES7677-1DD00-0BB0, 6AV6642-0BA01-1AX0,...

   more
   => https://support.industry.siemens.com/cs/ww/en/view/25209605/news
------------------------------------------------------------------------

2. Quality Assurance by means of Weighing, Controlling and Logging
   with the SIMATIC S7-1200 (Set 6)
 (9/28/2018) [82454336]

   This filling plant offers you the selection of the product via
   recipes, weight control via SIWAREX and logging via data logging
   with access via the integrated web server of the S7-1200.
For
   products:6AG1214-1AG40-4XB0, 6AG1215-1HG40-4XB0,...

   more
   => https://support.industry.siemens.com/cs/ww/en/view/82454336/news
------------------------------------------------------------------------ 

6. TCP-Fileserver for S7 Controller
 (9/28/2018) [109475508]

   If you want to store and process only few, essential PLC data on
   PCs, then you will get with this example a convenient alternative.
   This application shows you how the production data of all common S7
   CPUs can be stored directly in the files of a Windows
   computer.
For products:6ES7317-7TK10-0AB0,
   6ES7317-2FJ10-0AB0,...

   more
   => https://support.industry.siemens.com/cs/ww/en/view/109475508/news
------------------------------------------------------------------------  

 

9. Guide to Standardization
 (9/19/2018) [109756737]

   The standardization guide shows you how you can modularize your
   machines and systems. It gives you recommendations and hints for
   structured and standardized programming of your automation
   solutions.
For products:6ES7822-1..05-..

   more
   => https://support.industry.siemens.com/cs/ww/en/view/109756737/news
------------------------------------------------------------------------ 

 

4. Controlling several fans (ebm-papst) using the SIMATIC S7-1200 via
   Modbus RTU
 (9/21/2018) [109476801]

   This application example describes how to connect your EC fans from
   ebm-papst to a SIMATIC S7-1200 via Modbus RTU and how to monitor
   and control it from an operator panel.
For
   products:6ES7822-1BA03-4YE5, 6AG1241-1CH30-5XB1,...

   more
   => https://support.industry.siemens.com/cs/ww/en/view/109476801/news
------------------------------------------------------------------------

5. Library of general functions (LGF) for STEP 7 (TIA Portal) and
   S7-1200 / S7-1500
 (9/20/2018) [109479728]

   The library "LGF (Library of general functions)" contains
   additional functions for STEP 7 (TIA Portal).
For
   products:6ES7822-1..05-..

   more
   => https://support.industry.siemens.com/cs/ww/en/view/109479728/news
------------------------------------------------------------------------  

1. The TIA Portal Tutorial Center (videos)
 (9/18/2018) [106656707]

   The TIA Portal Tutorial Center is a media system with various
   videos which gives you an overview of the general functions and
   tools of the TIA Portal.
For products:6ES7822-1..05-..

   more
   => https://support.industry.siemens.com/cs/ww/en/view/106656707/news
------------------------------------------------------------------------ 

 

1. LOGO! Home Automation - Access control
 (9/6/2018) [109758541]

   A building shall be equipped with various access controls via
   keypads, or other coded access.
   Different requirements have to be considered.
   You get three ready-made switching programs for LOGO! 8 with an
   increasing complexity, with which you can integrate a CODE input,
   e.g. for a door access control.
For
   products:6ED1055-1NB10-0BA2, 6ED1055-1MB00-0BA2,...

   more
   => https://support.industry.siemens.com/cs/ww/en/view/109758541/news
------------------------------------------------------------------------  

1. Management, archiving and synchronization of the parameters of a
   SIDOOR ATD430W / ATD420W door drive with S7-300 and S7-1500/1200
 (9/12/2018) [109475648]

   SIMATIC-based management, archiving and synchronization of the
   parameter sets of
   SIDOOR ATD430W / ATD420W door drives using an S7 CPU via PROFINET
   or PROFIBUS.
For products:6FB1141-3AT10-3WE2,
   6FB1141-2AT10-3WE2

   more
   => https://support.industry.siemens.com/cs/ww/en/view/109475648/news
------------------------------------------------------------------------  

5. Data communication between S7-1200 stations and TeleControl Server
   Basic V3.1 via CP 1242-7 V2 and CP 1243-1 (Set 30)
 (9/10/2018) [39863979]

   An automation infrastructure contains S7-1200 substations which
   shall communicate cost-effectively with a central station via the
   mobile communications network or via Ethernet. The TeleControl
   Server Basic V3.1 software is installed in the central
   station.
For products:6GK7242-7KX31-0XE0, 6GK7243-1BX30-0XE0

   more
   => https://support.industry.siemens.com/cs/ww/en/view/39863979/news
------------------------------------------------------------------------  

------------------------------------------------------------------------
#  DOWNLOAD
------------------------------------------------------------------------ 

10. Firmware update for CPU 1215 FC, DC/DC/DC, 14DI/10DO/2AI/2AO
 (9/7/2018) [109477829]

   Firmware update for CPU 1215 FC, DC/DC/DC, 14DI/10DO/2AI/2AO
   .
For products:6ES7215-1AF40-0XB0

   more
   => https://support.industry.siemens.com/cs/ww/en/view/109477829/news
------------------------------------------------------------------------
11. Firmware-Update for CPU 1215 FC, DC/DC/RLY,14DI/10DO/2AI/2AO
 (9/7/2018) [109477830]

   Firmware-Update for CPU 1215 FC,
   DC/DC/RLY,14DI/10DO/2AI/2AO<br/>For products:6ES7215-1HF40-0XB0

   more
   => https://support.industry.siemens.com/cs/ww/en/view/109477830/news
------------------------------------------------------------------------
12. Firmware update CPU 1212 FC DC/DC/DC, 8DI/6DQ/2AI
 (9/7/2018) [109741879]

   Firmware-Update for CPU 1212FC, DC/DC/DC, 8DI/6DQ/2AI
For
   products:6ES7212-1AF40-0XB0

   more
   => https://support.industry.siemens.com/cs/ww/en/view/109741879/news
------------------------------------------------------------------------
13. Firmware-Update for CPU 1212 FC, DC/DC/RELAIS, 8DI/6DQ/2AI
 (9/7/2018) [109746558]

   Firmware-Update for CPU 1212FC, DC/DC/RELAIS, 8DI/6DQ/2AI
For
   products:6ES7212-1HF40-0XB0

   more
   => https://support.industry.siemens.com/cs/ww/en/view/109746558/news
------------------------------------------------------------------------
14. Firmware update for CPU 1212C, AC/DC/RELAIS, 8DI/6DO/2AI
 (9/7/2018) [107539957]

   Firmware update for CPU 1212C, AC/DC/RELAIS, 8DI/6DO/2AI
   6ES7212-1BE40-0XB0
For products:6AG1212-1BE40-4XB0,
   6ES7212-1BE40-0XB0,...

   more
   => https://support.industry.siemens.com/cs/ww/en/view/107539957/news
------------------------------------------------------------------------
15. Firmware update for CPU 1215C, DC/DC/RLY, 14DI/10DO/2AI/2AO
 (9/7/2018) [107540296]

   Firmware update for CPU 1215C, DC/DC/RLY, 14DI/10DO/2AI/2AO
   6ES7215-1HG40-0XB0
For products:6AG1215-1HG40-4XB0,
   6ES7215-1HG40-0XB0,...

   more
   => https://support.industry.siemens.com/cs/ww/en/view/107540296/news
------------------------------------------------------------------------
16. Firmware update for CPU 1215C, AC/DC/RLY, 14DI/10DO/2AI/2AO
 (9/7/2018) [107540594]

   Firmware update for CPU 1215C, AC/DC/RLY, 14DI/10DO/2AI/2AO
   6ES7215-1BG40-0XB0
For products:6ES7215-1BG40-0XB0,
   6AG1215-1BG40-4XB0,...

   more
   => https://support.industry.siemens.com/cs/ww/en/view/107540594/news
------------------------------------------------------------------------
17. Firmware update for CPU 1211C, DC/DC/RELAIS, 6DI/4DO/2AI
 (9/7/2018) [107539825]

   Firmware update for CPU 1211C, DC/DC/RELAIS, 6DI/4DO/2AI
   6ES7211-1HE40-0XB0
For products:6ES7211-1HE40-0XB0

   more
   => https://support.industry.siemens.com/cs/ww/en/view/107539825/news
------------------------------------------------------------------------
18. Firmware update for CPU 1212C, DC/DC/RELAIS, 8DI/6DO/2AI
 (9/7/2018) [107540369]

   Firmware update for CPU 1212C, DC/DC/RELAIS, 8DI/6DO/2AI
   6ES7212-1HE40-0XB0
For products:6ES7212-1HE40-0XB0,
   6AG1212-1HE40-2XB0

   more
   => https://support.industry.siemens.com/cs/ww/en/view/107540369/news
------------------------------------------------------------------------
19. Firmware update for CPU 1211C, AC/DC/RELAIS, 6DI/4DO/2AI
 (9/7/2018) [107539610]

   Firmware update for CPU 1211C, AC/DC/RELAIS, 6DI/4DO/2AI
   6ES7211-1BE40-0XB0
For products:6ES7211-1BE40-0XB0

   more
   => https://support.industry.siemens.com/cs/ww/en/view/107539610/news
------------------------------------------------------------------------
20. Firmware update for CPU 1217C, DC/DC/DC, 14DI/10DO/2AI/2AO
 (9/7/2018) [107540595]

   Firmware update for CPU 1217C, DC/DC/DC, 14DI/10DO/2AI/2AO
For
   products:6ES7217-1AG40-0XB0

   more
   => https://support.industry.siemens.com/cs/ww/en/view/107540595/news
------------------------------------------------------------------------
21. Firmware update for CPU 1214C, AC/DC/RELAIS, 14DI/10DO/2AI
 (9/7/2018) [107540156]

   Firmware update for CPU 1214C, AC/DC/RELAIS, 14DI/10DO/2AI
   6ES7214-1BG40-0XB0
For products:6ES7214-1BG40-0XB0,
   6AG1214-1BG40-4XB0,...

   more
   => https://support.industry.siemens.com/cs/ww/en/view/107540156/news
------------------------------------------------------------------------
22. Firmware update for CPU 1214C, DC/DC/RELAIS, 14DI/10DO/2AI
 (9/7/2018) [107539979]

   Firmware update for CPU 1214C, DC/DC/RELAIS, 14DI/10DO/2AI
   6ES7214-1HG40-0XB0
For products:6AG1214-1HG40-4XB0,
   6ES7214-1HG40-0XB0,...

   more
   => https://support.industry.siemens.com/cs/ww/en/view/107539979/news
------------------------------------------------------------------------
23. Firmware update for CPU 1214 FC, DC/DC/DC, 14DI/10DO/2AI
 (9/7/2018) [109477825]

   Firmware update for CPU 1214 FC, DC/DC/DC, 14DI/10DO/2AI
For
   products:6ES7214-1AF40-0XB0, 6AG1214-1AF40-5XB0

   more
   => https://support.industry.siemens.com/cs/ww/en/view/109477825/news
------------------------------------------------------------------------
24. Firmware update for CPU 1214 FC, DC/DC/RELAY, 14DI/10DQ/2AI
 (9/7/2018) [109477826]

   Firmware update for CPU 1214 FC, DC/DC/RELAY, 14DI/10DQ/2AI
For
   products:6ES7214-1HF40-0XB0, 6AG1214-1HF40-5XB0

   more
   => https://support.industry.siemens.com/cs/ww/en/view/109477826/news
------------------------------------------------------------------------  

------------------------------------------------------------------------
#  FAQ
------------------------------------------------------------------------

29. Configuring IE/AS-i LINK PN IO in STEP 7 (TIA Portal)
 (9/18/2018) [109483764]

   This article describes how to configure an IE/AS-i LINK PN IO in
   STEP 7 (TIA Portal).
For products:6GK1411

   more
   => https://support.industry.siemens.com/cs/ww/en/view/109483764/news
------------------------------------------------------------------------  

21. How do you open, edit and upgrade global libraries in the TIA
   Portal?
 (9/17/2018) [37364723]

   You open the libraries in the TIA Portal via the toolbar in the
   "Libraries" task card.
For products:6ES7822-0AA00-0YA0,
   6AV2105-....2-0,...

   more
   => https://support.industry.siemens.com/cs/ww/en/view/37364723/news
------------------------------------------------------------------------
22. How do you diagnose IO access errors with the S7-1200?
 (9/20/2018) [42781105]

   In STEP 7 (TIA Portal) you program the diagnostic error interrupt
   OB and enable the necessary functions for the module to be
   diagnosed.
For products:6ES7211-1HD30-0XB0,
   6ES7217-1AG40-0XB0,...

   more
   => https://support.industry.siemens.com/cs/ww/en/view/42781105/news
------------------------------------------------------------------------
23. In STEP 7 (TIA Portal), how do you change the pulse length for the
   pulse width modulation (PWM) in the user program of the S7-1200
   CPU?
 (9/20/2018) [63200733]

   For this you have to call and parameterize the instructions "MOVE"
   and "CTRL_PWM" in your program. You enable the pulse generator in
   the device configuration.
For products:6ES7211-1HD30-0XB0,
   6ES7217-1AG40-0XB0,...

   more
   => https://support.industry.siemens.com/cs/ww/en/view/63200733/news
------------------------------------------------------------------------
24. How do you download the 3D, CAx and ePLAN data for the SIMATIC
   products?
 (9/20/2018) [89671877]

   You can use the CAx download manager to access the latest product
   data for your CAD or CAE system.
For
   products:6ES7153-2DA80-0XB0, 6ES7332-5TB10-0AB0,...

   more
   => https://support.industry.siemens.com/cs/ww/en/view/89671877/news
------------------------------------------------------------------------  

34. How do you configure and program an S7 connection and the FB15
   'PUT' and FB14 'GET' function blocks for data transfer between
   an S7-1200 CPU and an S7-300 CPU?
 (9/5/2018) [92269951]

   This entry shows you how to exchange data between an S7-1200 and an
   S7-300 using S7 Communication.
For products:6AG1214-1AG40-4XB0,
   6AG1215-1HG40-4XB0,...

   more
   => https://support.industry.siemens.com/cs/ww/en/view/92269951/news
------------------------------------------------------------------------  

 

------------------------------------------------------------------------
#  Manual
------------------------------------------------------------------------ 

47. Tips and Tricks: Weighbridge load testing to check load cell
   serviceability
 (9/24/2018) [109760900]

   Rev. 1, Tooltips, Weighbridge Load Testing
For
   products:Weighbridge Load Testing

   more
   => https://support.industry.siemens.com/cs/ww/en/view/109760900/news
------------------------------------------------------------------------  

43. SIMATIC S7-1200 S7-1200 CPU firmware update V4.2.3
 (9/24/2018) [109760967]

   08/2018, Product Information, A5E44115569-AB
For
   products:6ES7212-1AE40-0XB0, 6ES7212-1BE40-0XB0,...

   more
   => https://support.industry.siemens.com/cs/ww/en/view/109760967/news
------------------------------------------------------------------------  

33. SIMATIC Bus links PN/PN coupler
 (9/26/2018) [44319532]

   10/2018, Hardware Installation and Operating Manual,
   A5E00717043-AG
For products:6ES7158-3AD10-0XA0

   more
   => https://support.industry.siemens.com/cs/ww/en/view/44319532/news
------------------------------------------------------------------------  

69. SIMATIC NET: Industrial Ethernet switches SCALANCE XM-400/XR-500
   Command Line Interface (CLI)
 (9/21/2018) [109760839]

   07/2018, Configuration Manual, C79000-G8976-C252-13
For
   products:6GK5528-0AA00-2AR2, 6GK5416-4GS00-2AM2,...

   more
   => https://support.industry.siemens.com/cs/ww/en/view/109760839/news
------------------------------------------------------------------------
70. SIMATIC NET: Industrial Ethernet switches SCALANCE XM-400/XR-500
   Web Based Management (WBM)
 (9/21/2018) [109760840]

   07/2018, Configuration Manual, C79000-G8976-C248-13
For
   products:6GK5528-0AA00-2AR2, 6GK5416-4GS00-2AM2,...

   more
   => https://support.industry.siemens.com/cs/ww/en/view/109760840/news
------------------------------------------------------------------------  

57. PN/BACnet LINK - BACnet Protocol Implementation Conformance
   Statement (PICS)
 (9/6/2018) [109760469]

   23.01.2017, Product Information
For products:6BK1621-0AA00-0AA0

   more
   => https://support.industry.siemens.com/cs/ww/en/view/109760469/news
------------------------------------------------------------------------  

------------------------------------------------------------------------
#  Product note
------------------------------------------------------------------------ 

67. Online Software Delivery - What’s new?
 (9/24/2018) [109748903]

   You are provided a summary of the new features and functions for
   the Online Software Delivery platform. We are also including a more
   detailed description for select OSD features.

   more
   => https://support.industry.siemens.com/cs/ww/en/view/109748903/news
------------------------------------------------------------------------  

57. Delivery release SIMATIC Machine Simulator
 (9/11/2018) [109760520]

   Virtual commissioning saves time and money
For
   products:6ES7823-1HA01-0YA5, 6ES7823-1HA10-0YA5

   more
   => https://support.industry.siemens.com/cs/ww/en/view/109760520/news
------------------------------------------------------------------------